8.3 OPERATOR CALL MESSAGES
Whenever the screen displays operator call messages, the printer goes off
line and the alarm sounds. The problem is one that the operator should be able
to resolve. After making any corrections, you should press [ERROR SKIP] to
recheck the status. If the error message is not displayed again, you may
continue printing straight away (if the error was one of the Engine Problems
below). If the error message was of any other type, you should press [ON
LINE] before continuing the print job.
8.3.1 Engine Problems These are mechanical problems that prevent the engine from being ready to
print.
Message
CASS: REFILL X
(X means the
current page size)
Meaning Action
cassette is current printing stops; refill paper
feeder; out of paper
TRAY: REFILL X
(X means the
current page size)
no paper in the multi- printing stops; refill paper
purpose tray
LOAD X CASS (X cassette . . is current printing stops; install the cas-
means the current feeder; no cassette in LC sette
page size) slot
PAPER JAMMING paper is jammed within; follow printer procedure in
status I, bit 5 “8.6 Paper Jamming”
SET EP/CLOSE side cover is open or no close the side cover or install
EP-L cartridge the EP-L cartridge
76