Star Micronics LC-7211 Using the Printer with OS/2 Warp, Setting up for printing with OS/2 Warp

53

Chapter 7: Using the Printer with OS/2 Warp

This chapter contains specific information about using the printer with IBM OS/2 Warp. It also shows you how to install the printer driver on your computer so you can control the printer. By reading this chapter, you will learn:

❏How to set up for printing with IBM OS/2 Warp

❏How to prepare for printing

❏How to print a document

Important!

See the “readme. txt” file for important information that became available after this documentation was printed.

Setting up for printing with OS/2 Warp

Before you can use the printer with OS/2 Warp, you must first perform the following procedure to install the printer driver supplied on the 3.5” floppy disk that comes with the printer.

❏Start up the OS/2 system.

❏Insert the floppy disk that comes with the printer into one of your computer’s disk drives.

❏Open the floppy in icon view.

❏Double click on the OS2\ENG folder.

❏Double click on the STARDM.DR_ file.

❏Drag the printer driver whose name matches the name of your printer to the desktop.