Star Micronics LC-90 NX-1010 user manual User Setup Utility

16User Setup Utility

❏Execute the command that installs the User Setup Utility:

A:\>SETUP ↵
Star LC-90 / NX-1010 Installation of User Setup Utility Version 1.0
	Please select Language
English
Deutsch
Français
Italiano
= Enter	= Scroll up	= Scroll down	F1	= Help
				ESC	= Abort

❏Select the language you want to use. and then press Enter.

Star LC-90 / NX-1010 Installation of User Setup Utility Version 1.0

Please Select Drive and Directory for Installation

Directory:

C:\star_

The HDD installation uses xxxKB of hard disk.

You may install this Printer Setup Utility onto a floppy disk if required, please see the users manual of the help [F1] for details.

= Enter

F1 = Help

ESC = Abort

The above screen appears in the language that you selected in the previous step.

❏Input the drive and directory names where you want the User Setup Utility stored. The following is the default directory name that creates a directory named “star” on your hard disk (drive C:) to store the User Setup Utility.

C:\star

You can use the left and right arrows, Delete and Back space when making changes in the box that contains the drive and directory names. If you require assistance while this screen is shown, press F1 for help.

❏After you specify drive and directory names, press Enter.

The User Setup Utility program is started up as soon as you press Enter, so you can use the pull-down menus to make the setup changes you want.