Star Micronics LC-90 NX-1010 user manual Selecting fonts in MS-DOS applications

44Using the Printer with MS-DOS

❏If none of the printers listed above is available in the application, choose one of the following. Once again, you should choose the one that is nearest to the top in the following list. Use User Setup Utility to select IBM emulation (page 20).

IBM ProPrinter III

IBM ProPrinter II

IBM ProPrinter

❏To print, follow the instructions given in the manual of the application you are using. Typically, you would select the application’s PRINT command, make any necessary changes in the window that appears (such as the number of copies to be printed), and then press the Enter key to start printing.

Selecting fonts in MS-DOS applications

Use the User Setup Utility to select a font when running an application under MS-DOS. For details on the fonts that are available and how to select them, see “NLQ Font” on page 22 of this manual.