―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-88
ESC RS d n
[Name] Set print density
[Code] ASCII ESC RS d n
Hex. 1B 1E 64 n
Decimal 27 30 100 n
[Defined Area] 0≤n≤15
48≤n≤57 (”0”≤n≤”9”)
65≤n≤70 (”0”≤n≤”F”)
[Initial Value] Memory switch setting
[Function] Sets print densit y.
T his command stops printing to be executed.
When in t wo-color print mode, this can set the print density of red print.
n Print Density
Single Color Pr inting Mode Two Color Printing Mode Red Print Density
0, 48 Print density 1.3 Print density 1.2
1, 49 Print density 1.2 Print density 1.2
2, 50 Print density 1.1 Print density 1.0
3, 51 Print density 1.0 Print density 1.0
4, 52 Print density 0.9 Print density 1.0
5, 53 Print density 0.8 Print density 0.8
6, 54 Print density 0.7 Print density 0.8
7, 55 (Reserved) (Reserved)
8, 56 (Reserved) (Reserved)
9, 57 (Reserved) (Reserved)
10, 65 (Reserved) (Reserved)
11, 66 (Reserved) (Reserved)
12, 67 (Reserved) (Reserved)
13, 68 (Reserved) (Reserved)
14, 69 (Reserved) (Reserved)
15, 70 (Reserved) (Reserved)