――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――���――――――――
STAR Line Mode Command Specifications 5-11
<Printer status 6 ETB Counter (Eighth Byte)>
Bit Contents Status Model Compatability
“0” “1”
TSP800
V. 4.0 or later
TSP700
V. 3.0 or
later
TSP600
V. 3.0 or
later
TUP900 TSP1000 TSP828L TSP700II TSP650
7 Fixed at 0 - - - - - - - - -
6 ETB Counter Bit-4 OK OK OK OK OK OK OK OK
5 ETB Counter Bit-3 OK OK OK OK OK OK OK OK
4 Fixed at 0 - - - - - - - - -
3 ETB Counter Bit-2 OK OK OK OK OK OK OK OK
2 ETB Counter Bit-1 OK OK OK OK OK OK OK OK
1 ETB Counter Bit-0 OK OK OK OK OK OK OK OK
0 Fixed at 0 - - - - - - - - -
(*) ETB Counter
This counter is the 5 bit ETB counter.
(It counts from 0 to 31. When the counter overflows, it counts up from 31 to 0.)
This counter is incremented by 1 using the <ETB> command.
The ETB counter is initialized by the following commands. When doing so, ASB ETB status is cleared.
However, when initializing the ETB counter, ASB is not transmitted.
<ETB Counter Initialization Commands>
• <ESC> <RS> E n : ETB Counter Initialization
• <CAN> : Cancel print data and initialize commands