―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-109
ESC GS / 6 n
[Name] Set partial cut before Auto Logo printing
[Code] ASCII ESC GS / 6 n
Hex. 1b 1d 2f 36 n
Decimal 27 29 47 54 n
[Defined Area] 0 ≤ n ≤ 1
[Initial Value] n = 0
[Function] Sets a partial cut before the Auto Logo printing.
This command is registered to the non-volatile memory by the “<ESC> <GS> / W” command.
This command is ignored when Auto Logo is being executed.
n Setting
0 Does not execute a partial cut before the Auto Logo printing.
1 Executes a partial cut before the Auto Logo printing.
When printing Logo2 and Logo3 as Auto Logo printing like the one in the drawing below, this
command selects to execute a partial cut before printing Logo2 of the Auto Logo and Logo3.
If a partial cut is executed using this function, it is possible to provide coupons, etc., that are printed
using Auto Logo with a partial cut.
***************
MACDONALDS
***************
1.CHEESBUGER $2. 00
2.CO KE $1. 00
----- ------- ------- ---
TOTA L $3. 00
************** ******
MACDONALD S
************** ******
1.CHE ESEB URGE R $2.0 0
2.COKE $1.00
--------------------------------------
TOTAL $3.00
Header
H eader
COKE
Cheeseburger Prints Logo 2
Prints Logo 3
Partial Cut
Partial Cut
Header
************** ******
MACDONALD S
1. Starts Auto Log o with trigge r
of cu tting co mman d.
2. Executes user macro 1.
4. Executes user macro 2.
- Executes cut.
- Executes Header logo
p rintin g.
3. Prin ts Auto Lo go