―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-41
3.3.10. Bar Code
[Name]
[Code] ASCII ESC b n1 n2 n3 n4 d1 ... dk RS
Hex. 1B 62 n1 n2 n3 n4 d1 ... dk 1E
Decimal 27 98 n1 n2 n3 n4 d1 ... dk 30
[Defined Area] 0≤n1≤8, 48≤n1≤56 (”0≤n1≤”8”)
1≤n2≤4, 49≤n2≤52 (”1”≤n2≤”4”)
1≤n4≤255
n3 (bar code mode), d (bar code data), k (bar code data count) definitions differ according to the
type of bar code.
[Initial Value] - - -
[Function] Bar code printing is executed according to the following parameters.
If n1, n2, n3 and n4 are acquired and detected to be out of the defined area, data up to RS is
discarded.
• n1 bar code type selection
n1 Bar code type
0, 48 UPC-E
1, 49 UPC-A
2, 50 JAN/EAN8
3, 51 JAN/EAN13
4, 52 Code39
5, 53 ITF
6, 54 Code128
7, 55 Code93
8, 56 NW-7
• n2 Under-bar character selection and added line feed selection
n2 Under-bar character selection and added line feed selection
1, 49 No added under-bar characters Executes line feed after printing a bar code
2, 50 Adds under-bar characters Executes line feed after printing a bar code
3, 51 No added under-bar characters Does not execute line feed after printing a bar code
4, 52 Adds under-bar characters Does not execute line feed after printing a bar code
• n3 bar code mode selection
n3 Bar code type
UPC-E, UPC-A, JAN/EAN8 Code39, NW-7 ITF
J
AN/EAN13, Code128, Code93
1, 49 Minimum module 2 dots Narrow: Wide = 2:6 dots Narrow: Wide = 2:5 dots
2, 50 Minimum module 3 dots Narrow: Wide = 3:9 dots Narrow: Wide = 4:10 dots
3, 51 Minimum module 4 dots Narrow: Wide = 4:12 dots Narrow: Wide = 6:15 dots
4, 52 - - - Narrow: Wide = 2:5 dots Narrow: Wide = 2:4 dots
5, 53 - - - Narrow: Wide = 3:8 dots Narrow: Wide = 4:8 dots
6, 54 - - - Narrow: Wide = 4:10 dots Narrow: Wide = 6:12 dots
7, 55 - - - Narrow: Wide = 2:4 dots Narrow: Wide = 2:6 dots
8, 56 - - - Narrow: Wide = 3:6 dots Narrow: Wide = 3:9 dots
9, 57 - - - Narrow: Wide = 4:8 dots Narrow: Wide = 4:12 dots