―――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――――
STAR Line Mode Command Specifications 3-104
ESC GS / W
[Name] Register Auto Logo setting to non-volatile memory
[Code] ASCII ESC GS / W
Hex. 1b 1d 2f 57
Decimal 27 29 47 87
[Defined Area] - - -
[Initial Value] - - -
[Function] Registers Auto Logo setting to non-volatile memory
After registration, the printer is reset.
This command is ignored when Auto Logo is being executed.
ESC GS / C
[Name] Initialize Auto Logo setting to non-volatile memory
[Code] ASCII ESC GS / C
Hex. 1b 1d 2f 43
Decimal 27 29 47 67
[Defined Area] - - -
[Initial Value] - - -
[Function] Initializes registered data in the non-volatile memory of the Auto Logo function.
After initializati on, the printer is reset.
T his command is ignored when Auto Logo is being executed.
T he default values of the Auto Logo function are below.
Setting Initial Value
Auto Logo Function OFF
Command Character None
User Macro 1 None
User Macro 2 None
Command Character Switch No print
Partial Cut Before Auto Logo Printing Disabled