2
PT-10Y Push Tractor Unit The PT-10Y Push Tractor Unit allows you to print on continuous fanfold paper
up to 10 inches wide. This manual describes the operational procedures for
using the PT-10Y.
Installing the push tractor unit
❏
Make sure that the printer is unplugged from its AC power source.
❏
Open the front cover of the printer as described in the printer’s Users
Manual.
❏
Detach the automatic sheet feeder as described in the printer’s Users
Manual.
❏
Remove the two covers on the back of the printer that conceal the tractor
feeder hooks.
Important!
Make sure that you keep these two covers in a safe place so you can replace
them if you ever remove the tractor feeder from the printer.
covers
This document was created with FrameMaker 4.0.4