Star Micronics RS232 manual N1 n2

STAR MODE

FUNCTION

CODE

HEX

REMARKS

FUNCTION

CODE

HEX

REMARKS

FUNCTION

CODE

HEX

REMARKS

Sets the magnification rate in character height.

<ESC> “h” n

1B 68 n

Prints the subsequent data magnified in character height by a rate specified by the value of n.

n	Character height	n	Character height
0	Unmagnify	3	Quadruple
1	Double	4	Quintuple
2	Triple	5	Sextuple

The value of n can be set to 0(00H) to 5(05H) or “0”(30H) to “5”(35H).

Sets the magnification rates in character width and height.

<ESC>	“i”	n1 n2
1B	69	n1 n2

Prints the subsequent data in the size specified by n1, n2. n1 indicates the height magnification and n2 indicates the width

magnification.
n1 (n2) = 0	Normal height (or width) size.
1	Double height (or width) size.
2	Triple height (or width) size.
3	Quadruple height (or width) size.
4	Quintuple height (or width) size.
5	Sextuple height (or width) size.

The values of n1, n2 are 0(00H) to 5(05H) or “0”(30H)” to “5”(35H).

Underlining

<ESC> “–” n

1B 2D n

When the value of n is 1, underlines the subsequent data including a character spacing set by <ESC><SP> n.

The part to be skipped by the horizontal tab setting and the block graphic characters are not underlined.

Resets the underline mode when the value of n is 0.

The value of n can be set to 0(00H) or “0”(30H), or 1(01H) or “1”(31H).

– 32 –