10)When the unusual (such as noise, stench, smoke, fire, etc.) is found, turn off the power immediately. Then disconnect the plug. If the TCP100/ 2000 reader/writer being kept using, it may cause failure, skin burn, etc. Contact our sales/tech support team for repair.
11)Connect and disconnect the power cable only with power turned off and while holding the plug. Do not put any heavy objects on the power cable. Stop using the cable immediately if any damage or deformation is found on it. Contact our sales/tech support team for repair.
12)Disconnect the power cable from socket, if the TCP100/2000 reader/ writer is not used for long time.
13)Do not use the TCP100/2000 reader/writer when the environment (such as temperature, humidity) changes drastically. It may cause dew con- densation which can bring malfunction, etc. Leave the TCP100/2000 reader/writer in the new environment at least for one hour, before re- start.
14)Do not use the TCP100/2000 reader/writer under dew condensation. It may cause malfunction, failure, electric shock, etc.
15)Clean the TCP100/2000 reader/writer everyday in order to maintain the reliability. No cleaning may cause error operation. (Refer to Chapter 6 CLEANING.)
16)Do not disassemble, modify and repair the TCP100/2000 reader/writer by yourself. It may cause malfunction, failure, injury, etc. Contact our sales/tech support team for repair.
17)Do not leave the card in direct sunshine or a fluorescent light for long time, as the card surface may get discolored.
18)In case the printed context is erased: It can be reprinted, if the data in the magnetic stripe remains.
19)If the card gets stained: Unclean or oily card lowers the read/write and print quality. In such a case, please clean the card and the unit. (For the cleaning of the unit, refer to Chapter 6 CLEANING.)
20)If you use continuously the same card, please leave at least
3
