– 5 –
ENGLISH
Position the printer over the wall bracket
and then slide it downwards to set it in
place.
The printer is fixed in place by interlock-
ing the hook on the place attached to the
bottom of the printer with the hook con-
nector on the bracket. It is not necessary
to secure it further with screws, etc.
Wood structure wall Concrete structure wall
• Locate the beams in the
wall and mount using
them.
•Do not tighten the screws
or anchors to locations
with one wall sheet.
Always make sure that
the screws penetrate the
beams. (This is so the
weight of the printer can
be supported.)
Screw
Beam
Wall
Anchor nuts
Concrete wall
•Drive the anchor nuts
into the wall and tighten
the screws.