Star Micronics TUP500 technical manual Adjustment of the Presenter Sensor

1.3Adjustment of the Presenter Sensor

1.Turn the printer off and unplug the power cord.

2.Remove the screws. Then, remove the board chassis.

3.Using the tip of a ballpoint pen or a similar object, set the DIP switches as follows: DSW1-4 OFF, DSW1-5 ON.

Screw DIP Switch DSW1

Board chassis

4.Set paper into the presenter portion as shown below.

Lift the paper holder and insert the paper. Rotate the knob toward yourself to set the paper perfectly straight.

Paper Holder

Knob

-  -