20
This error requires the printer to be reset after executing a determined error recovery means because a fatal error has occurred.
The printer many need to be repaired if the same error occurs even after resetting the printer.
Error |
| LED | Cause | How to Recover | |
| Power |
| Error |
|
|
OFF |
| Blink | Cutter failure | Check/repair the cutter | |
|
|
| 125msec |
|
|
Presenter Paper Jam Errors | OFF |
| Blink | Paper jam in | Remove paper from |
|
|
| 250msec | Presenter | the Presenter |
FLASH Access Errors | OFF |
| Blink | FLASH ROM | Repair |
|
|
| 500msec | Access Errors |
|
EEPROM Access Errors | OFF |
| Blink | EEPROM | Repair |
|
|
| 750msec | Access Errors |
|
SRAM Access Errors | OFF |
| Blink | SRAM Access | Repair |
|
|
| 1000msec | Errors |
|
Thermistor Errors | OFF |
| Blink | Head | Repair |
|
|
| 1500msec | Thermistor |
|
|
|
|
| Error Value |
|
|
|
|
| Detected |
|
|
|
|
|
|
|
Power Voltage Errors | OFF |
| Blink | Power Voltage | Check/repair the power |
|
|
| 2000msec | Error Value | supply |
|
|
|
| Detected |
|
|
|
|
|
|
|
Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 088371 Date: 12/3/2007
