33
STATUS SETUP
Please refer to the following instructions for a step by step guide on how to configure and use the Status function.
You will need
Raster Driver:
The raster driver is available as a download from our web site:
http://www.star‐micronics.co.jp/service/s_print/
It’s important to choose the “TUP992 printer with status monitor.” If you have a printer with presenter attached ( TMP992 / TUP992) as the presenter will not function correctly with the TUP942 driver.
Memory Switch Utility:
T9setup.exe is currently available from
http://www.star‐emea.com/techsupport/drivers.html
Version 1.1 or greater must be used, so that the presenter sensor can be configured.
ASB specifications:
Available from www.starmicronics.com
Installation
You will need to install the printer driver and ensure that the printer can print a self test. The installation method varies by interface. For a parallel printer the printer can be connected and the driver can be installed manually and with a USB printer you should install the driver files and then connect the printer.
Assuming USB Interface:
Extract and run the Raster driver installer.
Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 0883717 Date: 12/3/2007