INSTALLING THE ROM ADJUST AND CAM ASSEMBLY:
1.Locate (from left to right) one (M8, 20MM, Socket Head Cup screw), one (M8, Washer), two (Taper Bearings) and the ROM ADJUST ASSEMBLY as shown.
2.Insert a taper bearing to the shaft of the ROM ADJUST ASSEMBLY until it bottoms all the way against the ROM PLATE.
3.Place the assembly into the TAPER BEARING HOUSING, as shown.
4.Install the second TAPER BEARING onto the shaft and into the TAPER BEARING HOUSING.
. . .continue to next page. . .
Page 6
