INSTALLING THE CAM ASSEMBLY :
5.Align the flat on the shaft with the D- Shaped slot on the CAM ASSEMBLY.
6.Use one (M8, 20MM, Socket Head Cap screw), one (M8, Washer), one (End Cap Without a Groove) to install the CAM ASSEMBLY to the ROM ADJUST ASSEMBLY using a 6mm hex key socket.
INSTALLING THE SHIN PAD ASSEMBLY:
1.Locate one 20MM diameter SHAFT with a flat and the SHIN PAD assembly.
2.Align the SHIN PAD assembly to the ROM ADJUST BRACKET, as shown.
3.Insert the 20MM SHAFT with a flat.
4.Install two (M8, 20MM Socket Head Cap Screw), two (M8, 1MM Thick Washer), and two (End Caps Without a Groove) and tighten screws, using a 6mm hex key socket
Page 7
