INSTALLING THE SEAT BOTTOM:
1.Using four (M8,25MM,Button Head Bolts) and four (M8,washers) install and tighten the SEAT BOTTOM using a 5mm hex key socket.
INSTALL THE CABLE:
1.Locate the loose cable end and loop around the pulley as shown making sure not to fray the stranded wire.
ATTACHING THE CABLE:
1.Pull and insert the CABLE END into
the CABLE MOUNT of the CAM until the end of the CABLE is visible in the sight hole.
2.Secure with the four sets screws (M8) included, using a 4MM hex key. Torque to
Page 9
