Star Trac NOT FOUND, E-TCI manual In-Lbs 4.0 Nm

7.Connect the cables extruding through the lower section of the neck mask into the corresponding locations on the lower base (Fig. 7).

Fig. 7

8.Mount the left & right lower handrail sections to the TreadClimber base and loosely thread four socket head cap bolts to each handrail mount (Fig. 8) along with sliding on the corresponding left & right handrail grommets into place.

Final Torque:

o240 In-Lbs (27 Nm)

Fig. 8

9.Slide a beauty ring onto each lower handrail section (Fig. 9) and mount the upper handrail by loosely threading two button head cap screws in place. Verify that the radius cutout clears the lower securing screw.

Final Torque:

o35 In-Lbs (4.0 Nm)

Fig. 9

TREADCLIMBER by STAR TRAC - OWNER’S MANUAL Assembly Instructions 24