State Industries Oil & Dual Fuel Commercial Water Heaters, Gas warranty Asme, Specifications

TPX Power Low NOX Large Volume Commercial Water Heaters

SPECIFICATIONS

	Nominal	Input		Output (Gallons)
Model Number	Storage	Rating								Dimensions In Inches							Motor HP
	Capacity	BTU/Hr.	First		Recovery
																	120V 60 Hz 1
	U.S.	Natural	Hour
	Gallons	Gas	Rating	80°F Rise	100°F Rise	140°F Rise	A	B	C	D	E	F	G	H	J
TPX 150 400 NEA	150	400,000	507	485	387	277	831⁄2	14	1	273⁄4	11⁄4	54	7	571⁄2	73	1	⁄7 HP - 2.5 Amps
TPX 150 540 NEA	150	540,000	644	654	524	374	831⁄2	14	1	273⁄4	11⁄4	54	8	571⁄2	73
TPX 200 800 NEA	200	800,000	936	970	776	554	831⁄2	15	11⁄4	321⁄2	11⁄2	60	10	72	73
TPX 200 1000 NEA	200	1,000,000	1130	1212	970	693	831⁄2	15	11⁄4	321⁄2	11⁄2	60	10	72	73
TPX 200 1250 NEA	200	1,250,000	1372	1515	1212	866	831⁄2	15	11⁄4	321⁄2	11⁄2	60	12	72	73
TPX 200 1500 NEA	200	1,500,000	1615	1818	1455	1039	831⁄2	15	11⁄2	321⁄2	11⁄2	60	12	72	73
TPX 300 800 NEA	300	800,000	1016	970	776	554	911⁄2	14	11⁄4	261⁄2	11⁄2	60	10	72	83
TPX 300 1000 NEA	300	1,000,000	1210	1212	970	693	911⁄2	14	11⁄4	261⁄2	11⁄2	60	10	72	83	1⁄3 HP - 8.6 Amps
TPX 300 1250 NEA	300	1,250,000	1452	1515	1212	866	911⁄2	14	11⁄4	261⁄2	11⁄2	60	12	72	83
TPX 300 1500 NEA	300	1,500,000	1695	1818	1455	1039	911⁄2	14	11⁄2	261⁄2	11⁄2	60	12	72	83
TPX 400 800 NEA	400	800,000	1096	970	776	554	911⁄2	15	11⁄4	321⁄2	2	67	10	84	81
TPX 400 1000 NEA	400	1,000,000	1290	1212	970	693	911⁄2	15	11⁄4	321⁄2	2	67	10	84	81
TPX 400 1250 NEA	400	1,250,000	1532	1515	1212	866	911⁄2	15	11⁄4	321⁄2	2	67	12	84	81
TPX 400 1500 NEA	400	1,500,000	1775	1816	1455	1039	911⁄2	15	11⁄2	321⁄2	2	67	12	84	81
TPX 400 1750 NEA	400	1,750,000	2017	2121	1697	1212	911⁄2	15	2	321⁄2	2	55	14	911⁄2	81	1 HP - 12.4 Amps
TPX 400 2000 NEA	400	2,000,000	2259	2424	1939	1385	991⁄2	15	2	321⁄2	2	55	14	911⁄2	89
TPX 600 1000 NEA	600	1,000,000	1450	1212	970	693	119	15	11⁄4	321⁄2	2	67	10	84	109
TPX 600 1250 NEA	600	1,250,000	1692	1515	1212	866	119	15	11⁄4	321⁄2	2	67	12	84	109	1⁄3 HP - 8.6 Amps
TPX 600 1500 NEA	600	1,500,000	1935	1816	1455	1039	119	15	11⁄2	321⁄2	2	67	12	84	109
TPX 600 1750 NEA	600	1,750,000	2177	2121	1697	1212	119	15	2	321⁄2	2	55	14	911⁄2	109	1 HP - 12.4 Amps
TPX 600 2000 NEA	600	2,000,000	2419	2424	1939	1385	119	15	2	321⁄2	2	55	14	911⁄2	109

Certified Minimum Installation Clearances to Combustibles: Front: 18 inches

Back: 0 inches

Sides: 0 inches

Top: 5 inches

A clearance of 24 inches should be maintained from serviceable parts such as relief valve, power burner, drain valve and anodes (anodes are located on side above cold water inlet).

Minimum gas supply pressure: 7 Inches W.C.

Maximum gas supply pressure: 13 Inches W.C.

TPX models are Category I appliances (Fan Assisted) and require a negative draft. These units should only be commonly vented with other Category I negative draft appliances per the latest addition of the National Fuel Gas Code. An approved/listed Type “B” venting material is recommended. A negative draft of -0.02˝ to -0.07 is required in the vent.

ASME

COMMERCIAL 500 Lindahl Parkway, Ashland City, TN 37015 • www.statewaterheaters.com

The Expert’s Choice®