State Industries Oil & Dual Fuel Commercial Water Heaters, Gas warranty

TPD Power Dual Fuel Large Volume Commercial Water Heaters

SPECIFICATIONS

	Actual			Output (Gallons)						Dimensions In Inches						Ship.
	Storage	Input	Firing
Model Number					Recovery											Wt.		Motor HP
	Capacity	Rating	Rate
																w/Burner		120V 60 Hz 1
	U.S.	BTU/Hr.	GPH
																(lbs.)
	Gallons			80°F Rise	100°F Rise	140°F Rise	A	B	C	D	E	F	G	H	J
TPD 150 140 ONEA	163	140,000	1	170	136	97	831⁄2	14	1⁄2	273⁄4	11⁄4	361⁄2	5	47	73	1292
TPD 150 199 ONEA	163	199,000	1.4	241	193	138	831⁄2	14	1⁄2	273⁄4	11⁄4	361⁄2	6	47	73	1292	1	⁄7 HP - 4.4 Amp
TPD 150 255 ONEA	163	255,000	1.8	309	247	176	831⁄2	14	1⁄2	273⁄4	11⁄4	361⁄2	6	47	73	1292
TPD 150 270 ONEA	163	270,000	1.9	327	262	187	831⁄2	14	1	273⁄4	11⁄4	361⁄2	6	571⁄2	73	1397
TPD 150 400 ONEA	151	400,000	2.8	485	387	277	831⁄2	14	1	273⁄4	11⁄4	361⁄2	7	571⁄2	73	1397
TPD 150 540 ONEA	151	540,000	3.8	654	524	374	831⁄2	14	1	273⁄4	11⁄4	361⁄2	8	571⁄2	73	1505
TPD 150 720 ONEA	145	720,000	5.1	873	698	416	831⁄2	14	11⁄4	273⁄4	11⁄4	361⁄2	10	571⁄2	73	1510	1⁄4 HP - 4.6 Amp
TPD 200 300 ONEA	221	300,000	2.1	364	291	208	831⁄2	15	1	321⁄2	11⁄2	443⁄4	6	661⁄2	73	2098
TPD 200 600 ONEA	221	600,000	4.2	727	582	416	831⁄2	15	1	321⁄2	11⁄2	443⁄4	8	661⁄2	73	2098
TPD 200 800 ONEA	221	800,000	5.7	970	776	554	831⁄2	15	11⁄4	321⁄2	11⁄2	443⁄4	10	661⁄2	73	2103
TPD 200 1000 ONEA	201	1,000,000	7.1	1212	970	693	831⁄2	15	11⁄4	321⁄2	11⁄2	443⁄4	10	661⁄2	73	2103	1⁄3 HP - 5.5 Amp
TPD 200 1250 ONEA	201	1,250,000	8.9	1515	1212	866	831⁄2	15	11⁄4	321⁄2	11⁄2	443⁄4	12	661⁄2	73	2467
TPD 200 1500 ONEA	201	1,500,000	10.7	1818	1455	1039	831⁄2	15	11⁄2	321⁄2	11⁄2	443⁄4	12	811⁄2	73	2757	3⁄4 HP - 10.2 Amp
TPD 300 300 ONEA	300	300,000	2.1	364	291	208	911⁄2	14	1	261⁄2	11⁄2	443⁄4	6	661⁄2	83	2150	1	⁄4 HP - 4.6 Amp
TPD 300 600 ONEA	300	600,000	4.2	727	582	416	911⁄2	14	1	261⁄2	11⁄2	443⁄4	8	661⁄2	83	2150
TPD 300 800 ONEA	300	800,000	5.7	970	776	554	911⁄2	14	11⁄4	261⁄2	11⁄2	443⁄4	10	661⁄2	83	2308
TPD 300 1000 ONEA	300	1,000,000	7.1	1212	970	693	911⁄2	14	11⁄4	261⁄2	11⁄2	443⁄4	10	661⁄2	83	2308	1⁄3 HP - 5.5 Amp
TPD 300 1250 ONEA	300	1,250,000	8.9	1515	1212	866	911⁄2	14	11⁄4	261⁄2	11⁄2	443⁄4	12	661⁄2	83	2584
TPD 300 1500 ONEA	300	1,500,000	10.7	1818	1455	1039	911⁄2	14	11⁄2	261⁄2	11⁄2	443⁄4	12	811⁄2	83	2774	3⁄4 HP - 10.2 Amp
TPD 400 600 ONEA	411	600,000	4.2	727	582	416	911⁄2	15	1	321⁄2	2	55	8	761⁄2	81	3207	1⁄4 HP - 4.6 Amp
TPD 400 800 ONEA	411	800,000	5.7	970	776	554	911⁄2	15	11⁄4	321⁄2	2	55	10	761⁄2	81	3212
TPD 400 1000 ONEA	411	1,000,000	7.1	1212	970	693	911⁄2	15	11⁄4	321⁄2	2	55	10	761⁄2	81	3212	1⁄3 HP - 5.5 Amp
TPD 400 1250 ONEA	411	1,250,000	8.9	1515	1212	866	911⁄2	15	11⁄4	321⁄2	2	55	12	761⁄2	81	3212
TPD 400 1500 ONEA	397	1,500,000	10.7	1816	1455	1039	911⁄2	15	11⁄2	321⁄2	2	55	12	911⁄2	81	3402
TPD 400 1750 ONEA	397	1,750,000	12.5	2121	1697	1212	911⁄2	15	2	321⁄2	2	55	14	911⁄2	81	3528	3⁄4 HP - 10.2 Amp
TPD 400 2000 ONEA	397	2,000,000	14.2	2424	1939	1385	991⁄2	15	2	321⁄2	2	55	14	911⁄2	89	3669
TPD 500 2250 ONEA	495	2,250,000	16	2727	2182	1558	110	15	2	321⁄2	2	55	16	911⁄2	100	4277	1 HP - 16 Amp
TPD 500 2500 ONEA	495	2,500,000	17.8	3030	2424	1732	110	15	2	321⁄2	2	55	16	911⁄2	100	4419
TPD 600 720 ONEA	594	720,000	5.1	873	698	499	119	15	11⁄4	321⁄2	2	55	10	761⁄2	109	3667	1	⁄4 HP - 4.6 Amp
TPD 600 1000 ONEA	594	1,000,000	7.1	1212	970	693	119	15	11⁄4	321⁄2	2	55	10	761⁄2	109	3667
TPD 600 1250 ONEA	594	1,250,000	8.9	1515	1212	866	119	15	11⁄4	321⁄2	2	55	12	761⁄2	109	3667	1⁄3 HP - 5.5 Amp
TPD 600 1500 ONEA	594	1,500,000	10.7	1816	1455	1039	119	15	11⁄2	321⁄2	2	55	12	911⁄2	109	3837
TPD 600 1750 ONEA	594	1,750,000	12.5	2121	1697	1212	119	15	2	321⁄2	2	55	14	911⁄2	109	3837	3⁄4 HP - 10.2 Amp
TPD 600 2000 ONEA	594	2,000,000	14.3	2424	1939	1385	119	15	2	321⁄2	2	55	14	911⁄2	109	3837
TPD 600 2250 ONEA	575	2,250,000	16	2727	2182	1558	119	15	2	321⁄2	2	55	16	911⁄2	109	4477	1 HP - 16 Amp
TPD 600 2500 ONEA	575	2,500,000	17.8	3030	2424	1732	119	15	2	321⁄2	2	55	16	911⁄2	109	4619

Certified Minimum Installation Clearances to Combustibles: Front: 18 inches

Back: 0 inches

Sides: 0 inches

Top: 5 inches

A clearance of 24 inches should be maintained from serviceable parts such as relief valve, power burner, drain valve and anodes (anodes are located on side above cold water inlet).

State Titan TPD models are Category I appliances

(Fan Assisted) and require a negative draft. These units should only be commonly vented with other Category I negative draft appliances per the latest addition of the National Fuel Gas Code. An approved/listed Type “B” venting material is recommended. A negative draft of -0.02˝ to -0.07 is required in the vent.

ASME

COMMERCIAL 500 Lindahl Parkway, Ashland City, TN 37015 • www.statewaterheaters.com

The Expert’s Choice®