State Industries Gas warranty Asme, Specifications, TPO 150 140 OEA, The Expert’s Choice

TPO Power Oil Large Volume Commercial Water Heaters

SPECIFICATIONS

	Actual			Output (Gallons)						Dimensions In Inches						Ship.
	Storage	Input	Firing
Model Number					Recovery											Wt.		Motor HP
	Capacity	Rating	Rate
																w/Burner		120V 60 Hz 1
	U.S.	BTU/Hr.	GPH
																(lbs.)
	Gallons			80°F Rise	100°F Rise	140°F Rise	A	B	C	D	E	F	G	H	J
TPO 150 140 OEA	163	140,000	1	170	136	97	831⁄2	14	–	273⁄4	11⁄4	361⁄2	5	47	73	1292
TPO 150 199 OEA	163	199,000	1.4	241	193	138	831⁄2	14	–	273⁄4	11⁄4	361⁄2	6	47	73	1292	1	⁄7 HP - 4.4 Amp
TPO 150 255 OEA	163	255,000	1.8	309	247	176	831⁄2	14	–	273⁄4	11⁄4	361⁄2	6	47	73	1292
TPO 150 270 OEA	163	270,000	1.9	327	262	187	831⁄2	14	–	273⁄4	11⁄4	361⁄2	6	571⁄2	73	1397
TPO 150 400 OEA	151	400,000	2.8	485	387	277	831⁄2	14	–	273⁄4	11⁄4	361⁄2	7	571⁄2	73	1397
TPO 150 540 OEA	151	540,000	3.8	654	524	374	831⁄2	14	–	273⁄4	11⁄4	361⁄2	8	571⁄2	73	1505
TPO 150 720 OEA	145	720,000	5.1	873	698	416	831⁄2	14	–	273⁄4	11⁄4	361⁄2	10	571⁄2	73	1510	1⁄4 HP - 4.6 Amp
TPO 200 300 OEA	221	300,000	2.1	364	291	208	831⁄2	15	–	321⁄2	11⁄2	443⁄4	6	661⁄2	73	2098
TPO 200 600 OEA	221	600,000	4.2	727	582	416	831⁄2	15	–	321⁄2	11⁄2	443⁄4	8	661⁄2	73	2098
TPO 200 800 OEA	221	800,000	5.7	970	776	554	831⁄2	15	–	321⁄2	11⁄2	443⁄4	10	661⁄2	73	2103
TPO 200 1000 OEA	201	1,000,000	7.1	1212	970	693	831⁄2	15	–	321⁄2	11⁄2	443⁄4	10	661⁄2	73	2103	1⁄3 HP - 5.5 Amp
TPO 200 1250 OEA	201	1,250,000	8.9	1515	1212	866	831⁄2	15	–	321⁄2	11⁄2	443⁄4	12	661⁄2	73	2467
TPO 200 1500 OEA	201	1,500,000	10.7	1818	1455	1039	831⁄2	15	–	321⁄2	11⁄2	443⁄4	12	811⁄2	73	2757	3⁄4 HP - 10.2 Amp
TPO 300 300 OEA	300	300,000	2.1	364	291	208	911⁄2	14	–	261⁄2	11⁄2	443⁄4	6	661⁄2	83	2150	1	⁄4 HP - 4.6 Amp
TPO 300 600 OEA	300	600,000	4.2	727	582	416	911⁄2	14	–	261⁄2	11⁄2	443⁄4	8	661⁄2	83	2150
TPO 300 800 OEA	300	800,000	5.7	970	776	554	911⁄2	14	–	261⁄2	11⁄2	443⁄4	10	661⁄2	83	2308
TPO 300 1000 OEA	300	1,000,000	7.1	1212	970	693	911⁄2	14	–	261⁄2	11⁄2	443⁄4	10	661⁄2	83	2308	1⁄3 HP - 5.5 Amp
TPO 300 1250 OEA	300	1,250,000	8.9	1515	1212	866	911⁄2	14	–	261⁄2	11⁄2	443⁄4	12	661⁄2	83	2584
TPO 300 1500 OEA	300	1,500,000	10.7	1818	1455	1039	911⁄2	14	–	261⁄2	11⁄2	443⁄4	12	811⁄2	83	2774	3⁄4 HP - 10.2 Amp
TPO 400 600 OEA	411	600,000	4.2	727	582	416	911⁄2	15	–	321⁄2	2	55	8	761⁄2	81	3207	1⁄4 HP - 4.6 Amp
TPO 400 800 OEA	411	800,000	5.7	970	776	554	911⁄2	15	–	321⁄2	2	55	10	761⁄2	81	3212
TPO 400 1000 OEA	411	1,000,000	7.1	1212	970	693	911⁄2	15	–	321⁄2	2	55	10	761⁄2	81	3212	1⁄3 HP - 5.5 Amp
TPO 400 1250 OEA	411	1,250,000	8.9	1515	1212	866	911⁄2	15	–	321⁄2	2	55	12	761⁄2	81	3212
TPO 400 1500 OEA	397	1,500,000	10.7	1816	1455	1039	911⁄2	15	–	321⁄2	2	55	12	911⁄2	81	3402
TPO 400 1750 OEA	397	1,750,000	12.5	2121	1697	1212	911⁄2	15	–	321⁄2	2	55	14	911⁄2	81	3528	3⁄4 HP - 10.2 Amp
TPO 400 2000 OEA	397	2,000,000	14.2	2424	1939	1385	991⁄2	15	–	321⁄2	2	55	14	911⁄2	89	3669
TPO 500 2250 OEA	495	2,250,000	16	2727	2182	1558	110	15	–	321⁄2	2	55	16	911⁄2	100	4277	1 HP - 16 Amp
TPO 500 2500 OEA	495	2,500,000	17.8	3030	2424	1732	110	15	–	321⁄2	2	55	16	911⁄2	100	4419
TPO 600 720 OEA	594	720,000	5.1	873	698	499	119	15	–	321⁄2	2	55	10	761⁄2	109	3667	1	⁄4 HP - 4.6 Amp
TPO 600 1000 OEA	594	1,000,000	7.1	1212	970	693	119	15	–	321⁄2	2	55	10	761⁄2	109	3667
TPO 600 1250 OEA	594	1,250,000	8.9	1515	1212	866	119	15	–	321⁄2	2	55	12	761⁄2	109	3667	1⁄3 HP - 5.5 Amp
TPO 600 1500 OEA	594	1,500,000	10.7	1816	1455	1039	119	15	–	321⁄2	2	55	12	911⁄2	109	3837
TPO 600 1750 OEA	594	1,750,000	12.5	2121	1697	1212	119	15	–	321⁄2	2	55	14	911⁄2	109	3837	3⁄4 HP - 10.2 Amp
TPO 600 2000 OEA	594	2,000,000	14.3	2424	1939	1385	119	15	–	321⁄2	2	55	14	911⁄2	109	3837
TPO 600 2250 OEA	575	2,250,000	16	2727	2182	1558	119	15	–	321⁄2	2	55	16	911⁄2	109	4477	1 HP - 16 Amp
TPO 600 2500 OEA	575	2,500,000	17.8	3030	2424	1732	119	15	–	321⁄2	2	55	16	911⁄2	109	4619

Certified Minimum Installation Clearances to Combustibles: Front: 18 inches

Back: 0 inches

Sides: 0 inches

Top: 5 inches

A clearance of 24 inches should be maintained from serviceable parts such as relief valve, power burner, drain valve and anodes (anodes are located on side above cold water inlet).

State Titan TPO models are Category I appliances

(Fan Assisted) and require a negative draft. These units should only be commonly vented with other Category I negative draft appliances per the latest addition of the National Fuel Gas Code. An approved/listed Type “B” venting material is recommended. A negative draft of -0.02˝ to -0.07 is required in the vent.

ASME

COMMERCIAL 500 Lindahl Parkway, Ashland City, TN 37015 • www.statewaterheaters.com

The Expert’s Choice®