Sterling STT 1600 operating instructions Entering Values

General Operation

3.3Entering Values

General procedure In input fields, values can be entered on the OP and transferred to the PLC. To do this, proceed as follows:

Step Procedure

1Branch initially to the screen you

require and then to the corresponding screen entry.

2Using the arrow keys, select the input field you require within the screen entry.

3Then enter your value. Depending on how the field has been con- figured, values may be input as

inputs of numerical values (refer to section 3.3.1),

inputs of alphanumeric values (refer to section 3.3.2),

inputs of symbolic values (refer to section 3.3.3).

4

Confirm your input with
You can cancel any incorrect
	ESC
input by pressing

The original value is then automatically reinserted in the field. Insert the correct value and then enter the corrected value by pressing

5Position the cursor in the next input field, insert the next value etc.

You can also use the arrow keys to move the cursor to the left or right to the previous input field to insert a different value in it.

6

Close the screen by pressing ESC

02/01GB

OP7, OP17	1
09/96