ERROR CODES
| Malfunction | Indicator |
|
|
|
Program Board | 01 | ERR |
Power Board | 02 | ERR |
Low Torque Error | 03 | ERR |
Clean Error | 04 | ERR |
Barrel Sensor | 05 | ERR |
Hopper Sensor | 06 | ERR |
Drive Motor | 07 | ERR |
|
|
|
To Clear Error Modes
Clean Error 04: Allow freezer to remain on (light blinking) with the power switch in the ON position for ten (10) minutes minimum. Next, place the power switch in the OFFposition for five (5) seconds minimum, then place the power switch in the ON position to restart freezer. All other errors turn power switch off for five (5) seconds minimum. Then place the power switch in the ON position to restart freezer.
O H M S
SENSOR RESISTANCE
60,000
55,000
50,000
45,000
40,000
35,000
30,000
12 | 16 | 20 | 24 | 28 | 32 |
º F
NOTE: SENSOR IS 10,000 OHMS AT 77°
19