5.Turn pump off.

6.Connect mix pump hose to pickup hose adapter using small hose clamp.

CAUTION

DO NOT TWIST MIX PUMP HOSE.

7.Turn pump off.

8.Allow remaining 6" (15cm) of tubing to feed hru pump until hose adapter prevents further feeding.

9.Turn pump off.

10.Connect free end of mix pump hose to 3-way Tee

Figure 7. Mix Pump

B.Connect 1/2 inch (12,7mm) I.D. plastic food grade tubing to check valve and then to the mix con- tainer. Observe check valve flow arrow. Secure with hose clamps. Then place assembly thru hole in cover and install retainer clip. Figure 9.

C.Connect 1/2 inch (12,7mm) I.D. plastic food grade tubing between the large port of air/mix tee and refrigerated mix transfer line. Secure with large hose clamp or equivalent. Figure 9.

CAUTION

Air/Mix tee must remain below the black cover/ clamp. If the tee is above the pump mix will drain to the air compressor resulting in pump damage.

D.Connect mix low cords.

6