When the switch is placed in the OFF position, the refrigeration system and auger will not operate.

When the switch is placed in the SERVE position, the refrigeration system and auger willoperate auto- matically. The switch should be placed in the SERVE position for normal operation.

C.Cabinet-Off-On Switch

The CABINET-OFF-ON switch is a two position toggle switch. When the switch is placed in the OFF position, the lower cabinet refrigeration system will not run. When the switch is placed in the ON position, the lower cabinet refrigeration system will run until the preset temperature is reached; then cycle ON and OFF to maintain that temperature.

D.Cab Indicator Light

A flashing light indicates the cab OFF-ON switch is in the OFF position, no refrigeration. Place the OFF- ON switch in the ON position for cab refrigeration.

E.Pump Switch

The pump motor switch is a two position toggle switch. When the switch is placed in the OFF position, the pump will not run. When the switch is placed in the ON position, the pump will run until the preset pressure is reached, then cycle ON and OFF as product is drawn to maintain that pressure.

F.Standby/Serve Switch

The standby/serve switch is a two position toggle switch. When the switch is placed in the standby position the freezer will cycle to maintain a tempera- ture below 41°F (-15°C). When the switch is in the Serve position the freezer will cycle to maintain a servable product.

G.Freezing Switch

The freezing switch is a two position toggle switch. When the switch is placed in the MAXIMUM position the freezer will be forced to run 30 seconds after the temperature control is satisfied.

H.High Head Pressure Cut Out

If the head pressure exceeds 445 psig (28 bar) air cooled andwater cooled, the high head pressure cutout will trip. The reset button can be accessed

from the side of the

freezer.

I.Low Mix Light

The low mix light will illuminate when the liquid level in the mix container drops below two gallons.

J.Front Door Safety Switch

The front door safety switch prevents the auger from turning when the front door is removed. The switch is open when the door is removed and closed when the door is properly installed.

10