User Instructions

1.GENERAL

1.1Installation and servicing must be carried out by a competent person in accordance with Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards for Installation, appropriate Codes of Practice and in accordance with the manufacturer’s instructions. It is recommended that a CORGI registered engineer be used for this purpose as they are approved by the HSE under the above regulations.

1.2This appliance is suitable for use in G.B. and I.E. using Natural Gas at a supply pressure of 20mbar or LPG at a supply pressure of 29mbar (Butane) or 37mbar (Propane).

1.3The installation shall also be completed in accordance with:

The Building Regulations issued by The Department of The Environment.

The Building Standards (Scotland) Regulations issued by the Scottish Development Department. For Republic of Ireland, reference should be made to the relevant standards governing installations (IS813:1996)

1.4Read all these Instructions before commencing installation.

1.5This appliance must be installed in accordance with the rules in force and only used in a sufficiently ventilated space.

1.6Ensure that curtains are not positioned above the stove, and that there is at least a clearance of 300mm between the sides of the stove and any curtains.

1.7The manufacturer considers the full outer casing of this stove to be a working surface. Therefore it will become hot whilst in operation. A suitable guard is recommended to protect young children, the aged and the infirm.

1.8This stove must only be operated with the door secured firmly in position. If any cracks appear in the glass the appliance must not be used until the glass panel is replaced.

1.9Do not attempt to burn rubbish in this stove.

1.10Any combustible shelves or surrounding furniture must only be fitted in accordance with the minimum dimensions detailed in Diagram 1.

AR0509.2

AR0531b

1.11Contact a competent service engineer to carry out relevant spillage checks etc. following home improvements carried out after installation of this stove (e.g. the fitting of double glazing).

1.12In all correspondence, please quote the appliance type and Serial Number which can be found on the databadge at the rear of the stove.

1.13This product is guaranteed for 2 years from the date of installation, as set out in the terms and conditions of sale between Gazco and your local Gazco dealer. Please consult with your local Gazco dealer if you have any questions. In all correspondence always quote the Model No. and Serial No. Please ensure the commissioning checklist is completed by your installer, as this is a requirement of your Guarantee.

2.LIGHTING THE STOVE

2.1Locate the control valve on the appliance. There are two control knobs on the valve, the right-hand knob controls the pilot ignition and the left-hand knob controls the main burner.

2.2If your appliance has already been upgraded to battery remote control, please refer to the instructions provided with the upgrade to operate the remote control. The following instructions will work for either situation.

AR0914

2.3Ensure that the left-hand control knob is pointing to off ( )

2.4Ensure that the right-hand control knob is pointing to off ( ).

2.5Press in the right-hand control knob and rotate it anticlockwise until a click is heard (keep pressing in) and the knob is pointing to pilot ( ). The pilot should now light. If the pilot has not lit, repeat the procedure until it does.

2.6Keep the control knob pressed in for 10 seconds and then release it, the pilot should stay alight. If the pilot goes out, repeat the procedure until it does.

2.7If the pilot will not light after repeated attempts, contact the retailer or installer from whom the appliance was purchased.

2.8Turn the right-hand control to point to main burner ( ) . The appliance can now be controlled using the left-hand control knob.

2.9Turn the left-hand control knob to point to low fire ( ) the main burner will light on low. The burner can now be controlled between low and high settings. Turn the control knob anti-clockwise to increase the flame height and clockwise to decrease the flame height.

THE YELLOW FLAMES WILL APPEAR WHEN THE FIRE HAS GAINED SUFFICIENT HEAT - TYPICALLY 10 TO 20 MINUTES.

IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHT THE APPLIANCE.

Gazco Ceremica Log Effect Stove Range specifications

The Stovax Gazco Ceramica Log Effect Stove Range is a perfect blend of modern design and traditional aesthetics, making it an ideal choice for homeowners looking to add warmth and charm to their living spaces. This range features a stunning log effect that mimics the look of real wood burning, providing the cozy ambiance of a traditional fireplace without the hassle of wood maintenance.

One of the standout features of the Ceramica Log Effect Stove is its advanced technology. The stove utilizes a highly efficient combustion system that maximizes heat output while minimizing emissions. This means that not only does it provide a welcoming warmth, but it also adheres to strict environmental standards, making it an eco-friendly heating choice. The range is designed to be compatible with various fuel types, including gas and electric, which allows for versatility in installation and operation.

The Ceramica range is characterized by its stylish ceramic exterior, available in a variety of colors and finishes. This modern design allows it to fit seamlessly into any home decor, from contemporary to rustic. The ceramic material not only enhances the visual appeal but also helps retain heat for extended periods, ensuring a lasting warmth throughout the room.

Moreover, the Ceramica Log Effect Stove is equipped with a powerful heat distribution system. This guarantees efficient warmth throughout the space, eliminating cold spots and providing a comfortable environment. The stove’s large viewing window offers an unobstructed view of the realistic flame effect, creating an inviting and soothing atmosphere.

User-friendliness is another key aspect of this stove range. It features intuitive controls and convenient design elements, allowing for easy operation and maintenance. The stove can be adjusted to suit individual preferences, and its automatic ignition system ensures a hassle-free start every time.

In conclusion, the Stovax Gazco Ceramica Log Effect Stove Range combines aesthetic elegance with cutting-edge technology. Its efficient heat output, eco-friendly operation, and distinctive design make it an outstanding choice for anyone looking to elevate their home’s heating solution while enhancing its visual charm. With its myriad of features and style, the Ceramica Log Effect Stove stands as a testament to quality and innovation in modern heating design.

Stovax Gazco Ceremica Log Effect Stove Range manual User Instructions, General, Lighting the Stove

Models: Gazco Ceremica Log Effect Stove Range