USER INSTRUCTIONS
6
AR0900
6.4• Place three coals equally spaced on the rear of the fuel bed so they touch the rear panel, Diagram 7
7
AR0901
6.5• Place five coals on the front of the fuel bed so they rest on the front coal effect and lean against the vertical fingers, Diagram 8
8
6.6• Place the remaining four coals between the two rows of coals
• Rotate the coals to ensure they are secure on the fuel bed, Diagram 9
9
AR0903
6.7• Close the door and tighten the bolt and domed nut
NOTE: ENSURE THAT THE COALS ARE POSITIONED, AS DETAILED ABOVE. ONLY USE THE CORRECT AMOUNT OF COALS, AS SPECIFIED IN THE DIAGRAMS
7.gazco flue sure system
7.1The stove is fitted with the Gazco Flue Sure System, which will act to cut off the gas supply to the burners in the event of incorrect operation of the flue. If the system acts to cut off the gas supply, this indicates that there is insufficient flue pull. If this occurs a minimum of 10 minutes should be allowed before trying to relight. Continued operation of this safety device means there may be a serious problem with the flue system. A qualified gas engineer should inspect this.
Do not use the stove until an engineer says it is safe to do so.
8.the flame failure device
8.1This is a safety feature incorporated in all GAZCO fires, which automatically switches off the gas supply if the pilot light goes out and fails to heat the thermocouple.
AR0902
6
