Studer Innotec C 1600-12, C 2600-24 user manual General Information

STUDER INNOTEC COMPACT

1 General Information

1.1Operating instructions

This manual is a part of the delivery package of every COMPACT inverter-charger. It serves as guidelines for safe and efficient operation of COMPACT. The instructions are only valid for use with the following devices and options:

COMPACT C 1600-12
COMPACT C 2600-24
COMPACT C 4000-48
Temperature sensor CT-35	AC cable cover CFC-01
Remote Control RCC-01	IP23 cover C-IP23
Power sharing remote control RPS-01	Solar charge controller CxxxxS

Every person who installs a COMPACT and/or works with it must be fully familiar with the contents of this manual and must follow exactly all the warnings and safety instructions. Installation of or any work on the COMPACT must be carried out by a qualified and trained staff. Installation and application must comply with the respective local installations codes and safety regulations.

1.2Quality and Warranty

During production and assembling, all COMPACT appliances go through many controls and tests. Fabrication, controls and tests are carried out in accordance with firm and established procedures. Every COMPACT has its own serial number, which helps to refer back to its original data in the event of controls or repairs. That is why you should never remove the identification plate showing the serial number. The production assembly and tests on all COMPACT appliances are totally carried out in our company in Sion, Switzerland. The warranty for these appliances is valid for uses and operating possibilities mentioned in this manual.

The warranty period for the COMPACT is 2 Years.

1.3Warranty Disclaimer

We do not accept any responsibility for any damages occurring through use, manipulation, working situation and handling, which are not explicitly mentioned in these operating instructions. Following cases are not covered by the warranty:

-High voltage at INPUT (i.e. 48V at the Battery INPUT of COMPACT 1600-12) Reverse polarity on Battery connections (+/- reversed)

Running liquid or oxidation through condensation in the appliance Defects caused by force, physical or mechanical means Changes not explicitly authorized by Studer INNOTEC

Not or only partly tightened screws and nuts after change of fuses or connecting cables Connecting other sources of energy such as PV-Modules on the INPUT „SOLAR +/-„ Transport damage, i.e. through bad handling and /or packing.

1.4Liability Disclaimer

Respecting this manual, servicing and method of installation, functioning, application and maintenance of the appliance can not be controlled or supervised by Firma Studer INNOTEC. Hence we do not accept any liability and responsibility for damages, loses and costs which result through the use of this appliance or which result through incorrect installation, incorrect operation or wrong application and maintenance or which by some other means maybe connected together to these. Similarly, we do not accept any responsibility for any violation of the patents rights or violation of any third party’s rights resulting from the use of this appliance

Studer INNOTEC reserves the right to modify the technical data or these operating instructions without issuing any prior notice.

1.5Precautions

This manual must be readily available for the user at all times. The user must be familiar with the precautions and safety aspects.

User manual COMPACT V4.0 E 4