PA N E L

D E S I G N

Additional panel design information can be found in the Sub-Zero Design Guide. Check our website at subzero.com.

S U B - Z E RO MODEL 315W I N S TA L L AT I O N

OVERLAY PA N E L S

O V E R L AY PA N E L S P E C I F I C AT I O N S

Door Panel Width – 1/8" (3) reveal* 15" (381)

Door Panel Height – 7/16" (11) reveal**

4" (102) toe space

301/16" (764)

Width of Rails and Stiles

21/4"

(57) min

Door Panel Thickness

5/8"

(16) min

Door Panel Weight

10 lbs (4.5 kg) max

 

 

 

Dimensions may vary + 1/8" (3).

*1/8" reveal is required if two units are placed side by side.

**7/16" (11) reveal from top of door panel to top of hinge.

Inspect the door panel for the minimum 5/8"

(16)thickness, the finished inside edge and the 10 lbs (5 kg) weight limit. See the Wine Storage section of the Sub-Zero Design Guide for additional panel information. Check our website at subzero.com.

Decide if the handle will be attached through the glass door frame or just through the deco- rative door panel. If it is just through the door panel, the handle must be attached first.

If you choose not to use the pre-drilled handle mounting holes, it will be necessary to fasten the handle from the rear of the door panel only, or drill one or more additional holes through the metal frame of the glass door.

A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel.

O V E R L AY D O O R D I M E N S I O N S

Overlay unit shown

14 3/4" (375)

10 3/4"

(273)

25 15/16"

(859)

FRONT VIEW

10

2915/16"

(760)

Dimensions in parentheses are in millimeters unless otherwise specified.

Page 10
Image 10
Sub-Zero 315W manual Pa N E L S I G N, E R L Ay Pa N E L S P E C I F I C At I O N S, E R L Ay D O O R D I M E N S I O N S