S U B - Z E RO MODEL 315W I N S TA L L AT I O N
INSTALLATION S P E C I F I C AT I O N S
A R E A R E Q U I R E M E N T S
Before moving the unit into place, be sure that the rough opening dimensions, electrical location, and minimum door clearances are accurate. Refer to the illustration below. Also Refer to page 5 for overall dimensions.
Be sure your electrician and cabinet installer have this information before finishing work is completed.
IMPORTANT NOTE: Make sure the floor under the unit is level with the surrounding finished floor.
IMPORTANT NOTE: For corner installations, door swing may be limited due to handle contact with the adjacent wall or cabinet face. You must allow a minimum of 2" (51) from the wall for a 90˚ door opening. This will ensure that the wine shelves can be fully extended.
Wine bottles are heavy. A fully loaded unit will weigh over 200 lbs (91 kg). Be sure the subflooring is adequate for the weight of both the unit and its contents.
The Model 315W is intended for indoor use only.
RO U G H O P E N I N G D I M E N S I O N S
151/4" (387)
ROUGH
OPENING
WIDTH
LOCATE
ELECTRICAL
ANYWHERE ON
BACK WALL
E
FRONT VIEW
NOTE: ROUGH OPENING DEPTH IS 24" (610)
341/2" (876)
ROUGH
OPENING
HEIGHT
341/16" (865)
MINIMUM
(LEVELERS IN)
| Dimensions in parentheses are in |
6 | millimeters unless otherwise specified. |
