Sub-Zero PRO 48 M O V I N G T H E G R I L L E, T I T I P B R a C K E T Installation

P R O 4 8 I N S T A L L A T I O N I N S T R U C T I O N S

R E M O V I N G T H E G R I L L E

In order to prevent damage to the grille, the top grille assembly should be removed prior to moving the unit.

To remove the grille assembly, pull out on the bottom edge of the grille and tilt the grille frame forward. Disconnect the low-voltage cable which connects the exterior temperature displays on the grille to the display module, and cut the two white cable ties which attach the network cable to the right grille support. These cables ties should be replaced once the unit is properly installed with the extra cable ties provided in this package. Remove the three 11 mm bolts from base of the grille. Remove the screw from the upper grille area to remove the grille assembly. Refer to the illus- tration below.

A N T I - T I P B R A C K E T I N S T A L L A T I O N

A N T I - T I P H A R D W A R E I N C L U D E D

12 12 x 63.5 mm PN HD
Wood Screw	6201190

39,52 mm x 95,25 mm

	Trubolt Anchor	6110620
12	#12 flat washer	6240040
3	#8–18 x 31,75 mm
	AB PH HD Screw	6201520
3	Nylon Zip-It Wall Anchor	6160390

Removing the grille Anti-tip bracket alignment

12