Sub-Zero PRO 48 AW E R a D J U S T M E N T, R T I C a L a D J U S T M E N T

Models: PRO 48

1 76
Download 76 pages 10.47 Kb
Page 19
Image 19

P R O 4 8 I N S T A L L A T I O N I N S T R U C T I O N S

D R AW E R A D J U S T M E N T

Check to make sure that all drawers are properly adjusted. If not, vertical and horizon- tal adjustments can be made to the drawers.

V E R T I C A L A D J U S T M E N T

The drawer must be removed to make vertical adjustments. To remove the drawer, pull the drawer all the way out until it stops, lift up evenly on both sides of the drawer front and pull out.

Loosen the three drawer slide mounting fasteners. Using a 11 mm open-end wrench, turn the adjustment fastener to the desired position and retighten the fasteners. Refer to the illustration below.

To reinstall the drawer, raise the front of the drawer and place onto the drawer slide tracks. Be sure to engage the front of the drawer slide with the drawer assembly.

Check alignment of the automatic drawer closer. If the closer catch does not align with the closer pin, adjust the position of the auto- close mechanism.

H O R I Z O N T A L A D J U S T M E N T

The drawer must be removed to make horizon- tal adjustments. To remove the drawer, pull the drawer all the way out until it stops, lift up evenly on both sides of the drawer front and pull out.

Loosen the screws on the front two slides, then move adjustments blocks to the desired position and retighten the screws. Refer to the illustration below.

Release the rear adjustment block by disen- gaging the snaps. Move the block forward to shift drawer to the right and back to shift drawer to the left. Each position will move the drawer 0,8 mm. Refer to the illustration below. Snap the block over the pins located on the rear adjuster. Both sides should be moved in the same direction.

To reinstall the drawer, raise the front of the drawer and place onto the drawer slide tracks. Be sure to engage the front of the drawer slide with the drawer assembly.

Vertical drawer adjustment

Horizontal drawer adjustment

Horizontal drawer adjustment

19

Page 19
Image 19
Sub-Zero PRO 48 AW E R a D J U S T M E N T, R T I C a L a D J U S T M E N T, R I Z O N T a L a D J U S T M E N T