Sub-Zero SRT484CG manual Convenience, each burner is designed with an

W O L F S E A L E D B U R N E R R A N G E TO P OPERATION

SURFACE B U R N E R S

A spark electrode ignites each surface burner.

This control eliminates the need for continuous

open flame pilots. For added safety and	Manually relight each burner individually.
	Do not try to manually relight the French
convenience, each burner is designed with an
	Top, charbroiler or griddle.
electronic reignition system. This feature
enables any burner to relight automatically in
the event it is accidentally extinguished.	D U A L S TA C K E D B U R N E R A S S E M B LY
Large burners provide a rating of 15,000 Btu/hr
	The unique dual stacked burner design
(4.4 kW) on HIGH, with 950 Btu/hr (.3 kW)
delivered at simmer. The small burner	combines all of the burner parts in one
provides a rating of 9,200 Btu/hr (2.7 kW) on	assembly.
HIGH, with 325 Btu/hr (.1 kW) delivered at	After cleaning or removing burner parts for
simmer. All burners have simmer settings.
	any reason, it is extremely important that you
A distinguishing feature of Wolf’s low Btu/hr	reassemble burners correctly.
control is its constant, low heat output without	The burner cap should sit flat on the burner
continuous ignitions. The flame diameter
	or you will not get a blue flame. Refer to the
remains full size; only the heat output is
	illustration below.
lowered. This patented dual stacked burner
design makes it possible to enjoy cooking at
full flame as well as maintain control while
simmering at the lowest flame setting.	Failure to position the burner parts
In case of a power outage, you can relight the	correctly could cause flames or gas to
	escape, causing heat damage to your
surface burners manually. Turn the control
	range, or burn between parts, resulting
knob to HIGH, then use a minimum 6" (152)
	in poor combustion.
igniter to manually light the burner.

Burner Cap

Igniter

Sealed Burner

Nyliner Insertion

Dual stacked burner assembly Nyliner insertion

10