Sub-Zero SRT484CG manual Cleaning T H E R a N G E to P, T E R I O R C L E a N I N G

Models: SRT484CG

1 28
Download 28 pages 40.86 Kb
Page 24
Image 24

W O L F S E A L E D B U R N E R R A N G E TO P CARE

S I G N AT U R E P O L I S H

Signature Polish is available from Signature Limited Laboratory,

P. O. Box 13436, Dayton, Ohio 45413-0436, or call 877-376-5474 (toll free).

CLEANING T H E R A N G E TO P

E X T E R I O R C L E A N I N G

Cleaning the classic stainless steel exterior

finish: Use a soft, nonabrasive stainless steel cleaner like Signature Polish (see side note) and apply with a soft, lint-free cloth. To bring out the natural luster, lightly wipe the surface with a water-dampened microfiber cloth, followed with a dry microfiber cloth. All work should follow the grain direction of the finish. Better results are obtained by keeping the cloth in continuous contact with the metal.

Refer to Care Recommendations on pages 22–23 for cleaning specific components of the Wolf sealed burner rangetop.

R A N G E TO P C L E A N I N G T I P S

Wait until surfaces are cool before cleaning.

For best results, wipe up spills and spatters as they occur and immediately after the rangetop has cooled. If splatters are allowed to cook on, they may permanently damage or stain the finish.

If in doubt about using one of your cleaners, check the label. To check if it is safe to use on your range, try a small amount on an inconspicuous area using very light pressure.

Use caution when spraying cleaners. Some contain caustic ingredients that can damage adjacent parts and finishes. Protect the adjacent parts by masking them off so that the overspray is contained to the finish being cleaned.

Do not spray cleaners on electrical controls, igniters, wires or knob valve stems.

24

Page 24
Image 24
Sub-Zero SRT484CG manual Cleaning T H E R a N G E to P, T E R I O R C L E a N I N G, N G E to P C L E a N I N G T I P S