Porcelain enamel Nently scratch the surface, Matte-finish

W O L F S E A L E D B U R N E R R A N G E TO P CARE

CARE R E C O M M E N DAT I O N S

C O M P O N E N T C A R E R E C O M M E N DAT I O N

Burner Pan	Caution! Do not use abrasive cleaners (e.g., Comet); they will perma-
Porcelain enamel	nently scratch the surface.
	Resistant to most stains, but not totally impervious to damage. Salt and
	some cooking liquids may pit and stain the surface. Always remove these
	spills immediately.
	General care: Use a clean cloth or sponge; wipe with warm water and a mild
	dish detergent. Rinse and dry immediately.
	Spray degreasers: Spray on a cloth and wipe surface to remove fingerprints
	and greasy spatters. Buff dry immediately to avoid streaking.
	Hard water stains: Use white vinegar and water.

Burner Cap	General care: Cool first. Remove grate. Wash caps in warm water and liquid
Matte-finish	detergent or mild abrasive cleaners. Foods high in acid or sugar content,
porcelain enamel	such as milk, tomatoes, sauerkraut, fruit juices or pie filling, may pit or craze
	the surface. Remove as soon as possible before heating again.

Remove from the rangetop and place on a flat surface near the sink to clean.

Nonabrasive cleaners: Hot water and liquid detergent, paste of baking soda and water, plastic pad or sponge.

Mild abrasive and abrasive cleaners: Use sparingly.

	Control Knobs	To remove the knobs, pull the knobs forward off the valve stem (see page 11
	Bezels	on nylon bearing).
	Powder-coated die	General care: Wipe each knob with a damp cloth and mild soap and water;
	cast zinc
	cast zinc	rinse and dry. Never soak in water or use abrasive cleaners; they will scratch

		the finish and may remove the markings. Do not place in dishwasher.
		Hand wash all decorative components of your rangetop. This includes the
		knobs, bezels, grates and burner caps. Do not clean any of these components
		in the dishwasher.

	Spark Igniters	Keep dry; never spray water or cleaner directly on the igniter. When cleaning
	Ceramic	around the surface burner, be careful that the cloth does not catch on the
		igniter and damage it.