10

GAS INSTRUCTIONS

 

 

TYPE OF GAS

Your natural gas grill is factory built to operate using natural gas only. Never attempt to operate your grill on gases other than the type specified on the grill rating plates.

Your grill operates at 4.5” of water column pressure. If replacement of the hose becomes necessary, factory specified parts are required. See your local dealer.

For safety and design reasons, the conversion of a Weber® grill from operation using Natural gas to operation using LP gas requires the change out of the entire gas supply system of the grill. If this becomes necessary, see your dealer for additional information.

WHAT IS NATURAL GAS?

Natural gas, often called methane, is a safe modern fuel. Natural gas is supplied by your local utility and should be readily available if your house is already heated with gas.

PORTABLE INSTALLATION

Weber® recommends moving the grill at least two (2) feet from the gas supply and any combustible surfaces. After the gas supply has been run and checked for leaks in accordance to the assembly instructions, you are ready to grill. To connect the hose to the gas supply, pull back the outer fitting, insert the hose fitting all of the way, and release the outer fitting. This process will produce a gas joint.

LEAK CHECK PREPARATION

CHECK THAT ALL BURNER VALVES ARE OFF

Valves are shipped in the “OFF” position, but you should check to be sure that they are turned off. Check by pushing in and turning clockwise. If they do not turn, they are off. Proceed to the next step. If they do turn continue turning them clockwise until they stop, then they are off. Proceed to the next step.

1

Swivel Connection

2

Install covers when hose is disconnected

 

 

3

Shut Off Valve

4Coat this pipe nipple with gas resistant pipe dope

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Socket

6

 

 

 

 

 

 

 

 

 

 

 

 

 

Male Connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Socket

2

Sleeve

3

Push Sleeve Back

4

Plug

Push plug until sleeve snaps forward locking plug in socket.

(This turns on gas automatically.)

When properly assembled the plug cannot be removed without pushing

the sleeve back.

To disconnect, push sleeve back and pull out plug.

(This automatically shuts off gas.)

CHECK FOR GAS LEAKS

WARNING: The gas connections of your Summit® gas grill have been factory tested. We do however recommend that you leak check all gas connections before operating your Summit® gas grill.

REMOVE CONTROL PANEL

Tool required: Phillips Screwdriver.

1)Remove the burner control knobs.

WWW.WEBER.COM®

Page 9 Page 11
Page 10
Image 10
Summit E/S-420/450 manual Type of GAS, What is Natural GAS?, Portable Installation, Leak Check Preparation
Page 9 Page 11

E/S-420/450 specifications

The Summit E/S-420/450 is a cutting-edge electric scooter that redefines urban mobility with its innovative features and advanced technologies. Designed for both efficiency and performance, this model caters to the needs of daily commuters and recreational riders alike.

One of the standout features of the Summit E/S-420/450 is its impressive range. With a high-capacity lithium-ion battery, riders can travel up to 50 miles on a single charge, making it suitable for longer journeys without the worry of running out of power. Its quick charging capability allows the battery to be replenished in just a few hours, ensuring minimal downtime.

Powering the scooter is a robust brushless motor that offers a top speed of 28 mph. This powerful motor not only provides an exhilarating ride but also excellent acceleration, allowing riders to merge into traffic confidently. The motor is paired with an efficient regenerative braking system, which helps to conserve energy by converting some of the kinetic energy back into battery power during braking.

The frame of the Summit E/S-420/450 is crafted from lightweight yet durable materials, ensuring a sturdy ride without compromising on maneuverability. The ergonomically designed handlebars and comfortable seat provide additional comfort for long commutes. The scooter also features an adjustable suspension system that absorbs bumps and ensures a smooth ride on various terrains.

Safety is a significant consideration in the design of the Summit E/S-420/450. It comes equipped with front and rear LED lights for increased visibility, as well as reflective strips on the body. The anti-lock braking system (ABS) ensures that riders can stop quickly and safely in emergency scenarios.

In terms of technology, the Summit E/S-420/450 boasts a user-friendly LCD display that provides real-time information on speed, battery level, and distance traveled. Bluetooth connectivity allows users to sync their devices, making it possible to receive navigation and call alerts while riding.

Overall, the Summit E/S-420/450 stands out in the crowded electric scooter market, combining range, speed, comfort, and safety in a sleek, stylish package. Whether for commuting to work or enjoying a weekend ride, this electric scooter offers an unmatched experience for riders looking for efficiency and fun in their daily travels. With its advanced features and technologies, the Summit E/S-420/450 is a significant step forward in personal transportation, promoting a sustainable future for urban mobility.
Top Page Image Contents