OPERATING INSTRUCTIONS

19

MANUALLY LIGHTING THE SMOKER BURNER

1)Open the lid.

DANGER

Failure to open the lid while igniting the grill, or not waiting 5 minutes to allow the gas to clear if the grill does not light, may result in an explosive flare-up which can cause serious bodily injury or death.

2)Open smoker box lid

3)Fill smoker with water soaked wood chunks or chips.

4)Make sure that all burner control knobs not being used are turned to “OFF”. (Push control knob in and turn clockwise to ensure that it is in the “OFF” position.)

5)Turn on the gas at source.

6)Put a match in the match holder and strike the match.

7)Insert match holder and lit match down through cooking grates and Flavorizer® bars to ignite smoker burner.

WARNING: Do not lean over the open grill while lighting.

8)Push smoker burner control knob in and turn to “START/HI”.

9)Check that the burner is lit by looking down through the cooking grate.

DANGER

If the smoker burner does not light, turn the burner control knob to “OFF” and wait 5 minutes to let the gas clear before you try again.

10)Close smoker cover after wood starts to smolder and turn control knob to “LOW”.

TO EXTINGUISH

Push in and turn each burner control knob clockwise to “OFF” position. Turn gas supply off at the source.

1

9

7

4

8

*The grill illustrated may have slight differences than the model purchased.

E/S-450

2

3

10

5

USING THE ROTISSERIE

Note: Before using your rotisserie, measure your food at the widest point. If it exceeds 9½” (241.8mm), it is too large to fit the rotisserie. If it is too large, food can be prepared using a roast holder and the Indirect Cooking Method.

IMPORTANT SAFEGUARDS

WARNINGS

Read all instructions before using your rotisserie.

This rotisserie is for outdoor use only.

Remove motor and store in a dry place when not in use.

Do not touch hot surfaces. Use barbecue mitts.

This rotisserie is not for use by children.

To protect against electrical hazards do not immerse cord, plugs, or motor in water or other liquids.

Unplug the motor from outlet when not in use or before cleaning.

Do not use rotisserie for other than intended use.

Make sure motor is off before placing it on the motor bracket.

Do not operate the rotisserie motor with a damaged cord or plug.

Do not operate the rotisserie motor if it should malfunction.

The rotisserie motor is equipped with a three prong (grounding) power cord for your protection against shock hazard.

The power cord should be plugged directly into a properly grounded three prong receptacle. If use of an extension cord is required, be sure that it is a minimum 16 AWG(1.3mm), 3-wire, well insulated cord marked for OUTDOOR USE ONLY and properly grounded.

When using an extension cord, make sure it is not in contact with a hot or sharp surface.

Outdoor extension cords should be marked with the letters “W-A” and a tag stating “Suitable for use with outdoor appliances”.

Do not cut or remove the grounding prong from the rotisserie motor power cord.

Do not let cord hang over any sharp edge or hot surface.

Do not expose to rain.

To reduce the risk of electric shock, keep extension cord connection dry and off the ground.

WWW.WEBER.COM®

Page 19
Image 19
Summit E/S-420/450 manual Manually Lighting the Smoker Burner, Using the Rotisserie Important Safeguards

E/S-420/450 specifications

The Summit E/S-420/450 is a cutting-edge electric scooter that redefines urban mobility with its innovative features and advanced technologies. Designed for both efficiency and performance, this model caters to the needs of daily commuters and recreational riders alike.

One of the standout features of the Summit E/S-420/450 is its impressive range. With a high-capacity lithium-ion battery, riders can travel up to 50 miles on a single charge, making it suitable for longer journeys without the worry of running out of power. Its quick charging capability allows the battery to be replenished in just a few hours, ensuring minimal downtime.

Powering the scooter is a robust brushless motor that offers a top speed of 28 mph. This powerful motor not only provides an exhilarating ride but also excellent acceleration, allowing riders to merge into traffic confidently. The motor is paired with an efficient regenerative braking system, which helps to conserve energy by converting some of the kinetic energy back into battery power during braking.

The frame of the Summit E/S-420/450 is crafted from lightweight yet durable materials, ensuring a sturdy ride without compromising on maneuverability. The ergonomically designed handlebars and comfortable seat provide additional comfort for long commutes. The scooter also features an adjustable suspension system that absorbs bumps and ensures a smooth ride on various terrains.

Safety is a significant consideration in the design of the Summit E/S-420/450. It comes equipped with front and rear LED lights for increased visibility, as well as reflective strips on the body. The anti-lock braking system (ABS) ensures that riders can stop quickly and safely in emergency scenarios.

In terms of technology, the Summit E/S-420/450 boasts a user-friendly LCD display that provides real-time information on speed, battery level, and distance traveled. Bluetooth connectivity allows users to sync their devices, making it possible to receive navigation and call alerts while riding.

Overall, the Summit E/S-420/450 stands out in the crowded electric scooter market, combining range, speed, comfort, and safety in a sleek, stylish package. Whether for commuting to work or enjoying a weekend ride, this electric scooter offers an unmatched experience for riders looking for efficiency and fun in their daily travels. With its advanced features and technologies, the Summit E/S-420/450 is a significant step forward in personal transportation, promoting a sustainable future for urban mobility.