OPERATING INSTRUCTIONS

23

 

 

MANUALLY LIGHTING THE ROTISSERIE BURNER

ATTENTION: READ BEFORE

LIGHTING ROTISSERIE BURNER

After a period of non-use, before lighting the Rotisserie Burner, a few seconds must pass for the gas supply line to fill. When holding a match to the rotisserie burner you will see a flash of flames moving from left to right across the Rotisserie Burner surface, the Rotisserie Burner is not lit until the entire ceramic surface is aflame. At this point, start a count of 20 seconds before releasing the Rotisserie Burner control knob. The Rotisserie Burner surface will glow red once the burner is fully ignited.

DANGER

Failure to open the lid while igniting the grill, or not waiting 5 minutes to allow the gas to clear if the grill does not light, may result in an explosive flare-up which can cause serious bodily injury or death.

CAUTION: The Rotisserie Burner flame may be difficult to see on a sunny day.

WARNING: Check hose before each use of grill for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the grill. Replace using only a Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.

Log onto www.weber.com®.

1)Open the lid.

2)Remove the warming rack and the cooking grates from the cookbox.

3)Make sure all burner control knobs are turned to “OFF”. (Push control knob in and turn clockwise to ensure that it is in the “OFF” position.)

4)Turn on the gas at source.

5)Put a match in the match holder and strike the match.

6)Hold match holder and lit match by right side of rotisserie burner.

WARNING: Do not lean over the open grill.

7)Push rotisserie burner control knob down and turn to “START/HI”. Continue to hold the control knob down until twenty (20) seconds after the burner has ignited.

8)Check that the burner is lit by looking for the rotisserie burner to glow red.

E/S-450

6

1

2

8

 

7

3

4

*The grill illustrated may have slight differences than the model purchased.

WARNING: If the rotisserie burner does not light, turn the burner control knob to “OFF” and wait 5 minutes to let the gas clear before you try again.

Note: When using the rotisserie with the lid closed, only light two of the main burners under the food (See Grilling Methods-Indirect Cooking). Check your food periodically to prevent over cooking on the outside. Turn off the rotisserie burner once the food has browned to the desired color. Finish cooking on Indirect heat.

TO EXTINGUISH

Push in and turn each burner control knob clockwise to “OFF” position. Turn gas supply off at the source.

WWW.WEBER.COM®

Page 23
Image 23
Summit E/S-420/450 manual Operating Instructions

E/S-420/450 specifications

The Summit E/S-420/450 is a cutting-edge electric scooter that redefines urban mobility with its innovative features and advanced technologies. Designed for both efficiency and performance, this model caters to the needs of daily commuters and recreational riders alike.

One of the standout features of the Summit E/S-420/450 is its impressive range. With a high-capacity lithium-ion battery, riders can travel up to 50 miles on a single charge, making it suitable for longer journeys without the worry of running out of power. Its quick charging capability allows the battery to be replenished in just a few hours, ensuring minimal downtime.

Powering the scooter is a robust brushless motor that offers a top speed of 28 mph. This powerful motor not only provides an exhilarating ride but also excellent acceleration, allowing riders to merge into traffic confidently. The motor is paired with an efficient regenerative braking system, which helps to conserve energy by converting some of the kinetic energy back into battery power during braking.

The frame of the Summit E/S-420/450 is crafted from lightweight yet durable materials, ensuring a sturdy ride without compromising on maneuverability. The ergonomically designed handlebars and comfortable seat provide additional comfort for long commutes. The scooter also features an adjustable suspension system that absorbs bumps and ensures a smooth ride on various terrains.

Safety is a significant consideration in the design of the Summit E/S-420/450. It comes equipped with front and rear LED lights for increased visibility, as well as reflective strips on the body. The anti-lock braking system (ABS) ensures that riders can stop quickly and safely in emergency scenarios.

In terms of technology, the Summit E/S-420/450 boasts a user-friendly LCD display that provides real-time information on speed, battery level, and distance traveled. Bluetooth connectivity allows users to sync their devices, making it possible to receive navigation and call alerts while riding.

Overall, the Summit E/S-420/450 stands out in the crowded electric scooter market, combining range, speed, comfort, and safety in a sleek, stylish package. Whether for commuting to work or enjoying a weekend ride, this electric scooter offers an unmatched experience for riders looking for efficiency and fun in their daily travels. With its advanced features and technologies, the Summit E/S-420/450 is a significant step forward in personal transportation, promoting a sustainable future for urban mobility.