GAS INSTRUCTIONS

11

 

 

2)Remove the two screws that secure the control panel to the frame.

3)Remove the control panel. Tilt panel forward and lift up and away from grill.

Completely remove the control panel (3) from the cooking box assembly exposing the valves, burners, igniter, and manifold.

CHECK THE FLEXIBLE HOSE TO MANIFOLD CONNECTION

The natural gas hose has been attached during the manuafacturing process. We do recommend that the hose to gas manifold connnection be leak tested, following guidelines in this Owner’s Guide, prior to barbecue operation.

CHECK FOR GAS LEAKS

DANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. Sparks or open flames will result in a fire or explosion which can cause serious bodily injury or death and damage to property.

WARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

Note: All factory-made connections have been thoroughly checked for gas leaks. The burners have been flame-tested. As a safety precaution however, you should recheck all fittings for leaks before using your Weber® gas barbecue. Shipping and handling may loosen or damage a gas fitting.

WARNING: Perform these leak checks even if your barbecue was dealer or store assembled.

You will need: a soap and water solution, and a rag or brush to apply it.

Make sure side burner is off (See LEAK CHECK PREPARATION). Remove valve control knob and screws. Remove porcelain top.

To perform leak checks: Slide back the collar of the quick disconnect (1). Push male fitting of the hose into the quick disconnect, and maintain pressure. Slide the collar closed (2). If it does not engage or lock, repeat procedure. Gas will not flow unless the quick disconnect is properly engaged.

Turn on gas supply.

Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form or if a bubble grows, there is a leak.

Note: Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks.

WARNING: Do not ignite burners when leak checking.

WWW.WEBER.COM®

Page 11
Image 11
Summit E/S-420/450 manual Check the Flexible Hose to Manifold Connection, Check for GAS Leaks

E/S-420/450 specifications

The Summit E/S-420/450 is a cutting-edge electric scooter that redefines urban mobility with its innovative features and advanced technologies. Designed for both efficiency and performance, this model caters to the needs of daily commuters and recreational riders alike.

One of the standout features of the Summit E/S-420/450 is its impressive range. With a high-capacity lithium-ion battery, riders can travel up to 50 miles on a single charge, making it suitable for longer journeys without the worry of running out of power. Its quick charging capability allows the battery to be replenished in just a few hours, ensuring minimal downtime.

Powering the scooter is a robust brushless motor that offers a top speed of 28 mph. This powerful motor not only provides an exhilarating ride but also excellent acceleration, allowing riders to merge into traffic confidently. The motor is paired with an efficient regenerative braking system, which helps to conserve energy by converting some of the kinetic energy back into battery power during braking.

The frame of the Summit E/S-420/450 is crafted from lightweight yet durable materials, ensuring a sturdy ride without compromising on maneuverability. The ergonomically designed handlebars and comfortable seat provide additional comfort for long commutes. The scooter also features an adjustable suspension system that absorbs bumps and ensures a smooth ride on various terrains.

Safety is a significant consideration in the design of the Summit E/S-420/450. It comes equipped with front and rear LED lights for increased visibility, as well as reflective strips on the body. The anti-lock braking system (ABS) ensures that riders can stop quickly and safely in emergency scenarios.

In terms of technology, the Summit E/S-420/450 boasts a user-friendly LCD display that provides real-time information on speed, battery level, and distance traveled. Bluetooth connectivity allows users to sync their devices, making it possible to receive navigation and call alerts while riding.

Overall, the Summit E/S-420/450 stands out in the crowded electric scooter market, combining range, speed, comfort, and safety in a sleek, stylish package. Whether for commuting to work or enjoying a weekend ride, this electric scooter offers an unmatched experience for riders looking for efficiency and fun in their daily travels. With its advanced features and technologies, the Summit E/S-420/450 is a significant step forward in personal transportation, promoting a sustainable future for urban mobility.