Sun Microsystems 10 manual Command Description

Version 3.1-enSolaris 10 Container Guide - 3.1 5. Cookbooks Effective: 30/11/2009

The following commands allow information to be displayed depending on the zones:

Command	Description
df(1M)	-Z
	displays the zone mounts
ifconfig(1M)	zone <zonename>
	assigns a virtual IP address to a zone
	-zone
	gives a virtual IP address back to the global zone
	-Z
	executes the command for all interfaces in the zone
ipcs(1)	-z <zonename>
	displays interprocess communication parameters of a zone
pgrep(1)	-z <zoneid>
	applies pgrep to processes in zone zoneid
poolstat(1M)	Displays statistics of resource pools
prctl	-i zoneid <zonename>
	Displays and modifies resource controls of zone processes
priocntl(1)	-i zoneid <zoneidlist>
	shows the scheduling parameters of the processes of a zone zoneid
prstat	-z <zonename>
	displays the process statistics of the processes of <zonename>
	-Z
	displays information on processes and zones together
ps(1)	-o pid,...,zone
	zone exists as a format field for configurable outputs
	-z <zonename>
	displays only <zonename> processes
	-Z
	displays the zone that the process belongs to
rcapstat(1)	-z

displays statistics for capped zones

rctladm(1M) Display and modification of global settings for resource controls Table 8: Commands used to display zone information

67