Sun Microsystems 150 Note

Sun Blade 150 CD-ROM, DVD-ROM, and Hard Drive Installation 9

FIGURE5 Installing a Secondary Hard Drive

10. Verify that the secondary IDE cable connector is connected to riser board

connector IDE2 (J503). See FIGURE7.

Note – Ensure that the cables are properly oriented by aligning the connector keys.

11. Verify that the CD-ROM or DVD-ROM cable is connected to the primary (IDE1,

J504) cable connector labeled CD/DVD (FIGURE5 and FIGURE6).

12. Connect the hard drive IDE cable connector labeled “Primary HDD” to the

primary hard drive.

Secondary hard drive

CD/DVD-ROM drive

IDE 1 (J504)

IDE cable connector

Contents

Main Please Recycle Contents Page Sun Blade 150 CD-ROM, DVD-ROM, and Hard Drive Installation Required Tools Preparing to Replace Components Powering Off the System Caution Removing the System Cover Attaching the Antistatic Wrist Strap Removing a Primary Hard Drive Page Replacing a Primary Hard Drive Note Caution Installing a Secondary Hard Drive Note Caution Removing a CD-ROM or DVD-ROM Drive Replacing a CD-ROM or DVD-ROM Drive Note Finishing Component Replacement Caution Powering On the System Note Hard Drive Mirroring Hard Drive Mirroring Configuration Note Required Software and Patches CD or DVD Handling and Use Inserting a CD or DVD Into the Drive Ejecting a CD or DVD ! Cleaning a CD or DVD Caution Handling and Storing CDs and DVDs