Sun Microsystems 150 Caution

10 Sun Blade 150 CD-ROM, DVD-ROM, and Hard Drive Installation Guide • June 2002

FIGURE6 Riser Board, Side Two

13. Connect the power cable to the secondary hard drive (FIGURE 7).

14. Connect the power cable to the primary hard drive.

15. Connect the secondary hard drive to the cable connector labeled “Secondary

HDD”.

The following diagram shows the cabling for the secondary hard drive.

FIGURE7 Secondary Hard Drive Cabling Configuration

Caution – Ensure that the cables will not be damaged when you replacethe system

cover.

J502 J501

J504

J503

IDE 1

IDE 2

IDE2 (J503)

Power cable

Secondary HDD

Contents

Main Please Recycle Contents Page Sun Blade 150 CD-ROM, DVD-ROM, and Hard Drive Installation Required Tools Preparing to Replace Components Powering Off the System Caution Removing the System Cover Attaching the Antistatic Wrist Strap Removing a Primary Hard Drive Page Replacing a Primary Hard Drive Note Caution Installing a Secondary Hard Drive Note Caution Removing a CD-ROM or DVD-ROM Drive Replacing a CD-ROM or DVD-ROM Drive Note Finishing Component Replacement Caution Powering On the System Note Hard Drive Mirroring Hard Drive Mirroring Configuration Note Required Software and Patches CD or DVD Handling and Use Inserting a CD or DVD Into the Drive Ejecting a CD or DVD ! Cleaning a CD or DVD Caution Handling and Storing CDs and DVDs