Sun Microsystems 3 manual Supported Hardware and Software, TCP/IP Connection Hardware Components

■One-to-many and multihop volume sets — The Sun SNDR software enables you to create one-to-many and multihop volume sets. In a one-to-many volume set, you can replicate data from one primary volume to many secondary volumes residing on one or more hosts. In a multihop set, the secondary host volume of one volume set can be the primary host volume of another volume set. See “One-to-Many and Multihop Volume Sets” on page 18.

Supported Hardware and Software

Operating Environment

Supporting Software

Optional

Software

Supported Volume Manager Software

Host Types

Supported Attached Storage

Solaris™ 7 or 8 operating environment or subsequent compatible version

Network transport software such as SunATM™ or Gigabit Ethernet transports

Sun StorEdge Instant Image software Version 3.0; install this package for additional point-in-time capability

Sun Logical Volume Manager

Sun Solstice DiskSuite™

Veritas Volume Manager

Server hosts using the Solaris operating environment and any Sun-supported network interface card. Hosts include:

•Sun Enterprise™ Server models 2x0 through 4x0

•Sun Enterprise Server models 3x00 through 10000

The Sun SNDR software is storage-hardware independent

TCP/IP Connection Hardware Components

The Sun SNDR software requires a TCP/IP connection between the primary and secondary server. Each server must have the proper ATM or Ethernet hardware installed to support the TCP/IP link.

The Sun SNDR software operates over any TCP/IP networking technology but has been qualified only on 10, 100, and 1000 Mbit Ethernet and ATM 166 and 622 technologies.

A dedicated TCP/IP link is not required.

Chapter 1 Overview 3