Sun Microsystems 9740 - page 54

Operating in Manual Mode

3-22 Revision P 95693

CAUTION:

Potential equipment damage: Before mounting a cartridge into the drive,

make sure that power is on, and that the Operate Handle indicator is on.

Use the drive shuttle to operate, not the drive handle.

A safety mechanism protects the drive if you try to operate it in an

incorrect state. The shuttle will not operate if this mechanism is

activated. To reset the safety mechanism, wait for the Operate Handle

indicator to turn on. Pull firmly on the shuttle, then push the shuttle in

completely. If the cartridge did not eject, or if the handle did not rise, pull

and push again.

To mount a cartridge into a DLT drive:

1. Follow the steps in “Mounting and Dismounting Cartridge Tapes” on page 3-19.

2. Make sure that the DLT handle is up and the cartridge handle hook and hub

are down. (See Figure3-11 on pag e3-21 for more infor mation.)

CAUTION:

Potential equipment damage: Insert the cartridge properly or you will

damage the drive. Use only DLT cartridges for DLT drives.

3. Hold the cartridge so that the VOLSER is facing you and the write protect

switch is on the right side of the cartridge, as shown in Figure 3-12.

Figure 3-12. Mounting a DLT Cartridge (E62379)

E6237

9

DRIVE

DLT

CARTRIDGE

Contents

Main Page Page ii Revision P 95693 Summary of Changes Page Contents Page Page Figures Tab le s Page Preface Page Suns External Web Site Customer Resource Center Partne rs Site Hardcopy Publications Page Notices Page 95693 Revision P xvii The following is the Internal Code License Agreement from Sun StorageTek: xviii Revision P 95693 General Information Robot Page Cartridge Access Port Storage Cells Cartridge Exchange Mechanism Page Page Controls and Indicators Tape Drives and Cabinets Controller Transport Units Page Figure 2-3. Operator Panel Function Keys, Indicators, and Displays (C62014) 95693 Revision P 2-5 Setting the SCSI Address Figure 2-4. Symbol Definitions for Menu Block Diagram (C62015) Symbol Definitions for Menu Block Diagrams How Used.... Setting the SCSI Address 2-6 Revision P 95693 Figure 2-5. Setting the SCSI Address (C62016) Operating the LSM Loading Cartridges through the CAP Page Ejecting Cartridges through the CAP SCSI Interface AUTO CLEAN Feature Cleaning Drives in the LSM 3-6 Revision P 95693 Setting the Cleaning Cartridge Usage Count Q Replacing Cleaning Cartridges Serial Interface Setting the Cleaning Cartridge Usage Count Replacing Cleaning Cartridges Unlocking the CAP and Removing Non-cleaning Cartridges Replacing Expired Cleaning Cartridges Opening the LSM Front Doors Figure 3-3. Opening Front Doors (C62021) Moving the Robot Raising and Lowering the Z Carriage Rotating the Z Column Locating a Cartridge in the Storage Cells 9740 with Expansion Door 95693 Revision P 3-15 Figure 3-7. Locating CartridgesPanels, Cells, Rows, Cartridge Drive (C62013) 3-16 Revision P 95693 Figure 3-8. Locating CartridgesPanels, Cells, Rows, Drive Cabinet (C62377) 95693 Revision P 3-17 Figure 3-9. Locating CartridgesPanels, Cells, Rows, CEM (C62524) Page Mounting and Dismounting Cartridge Tapes Mounting a Cartridge into a 9490 or SD-3 CTU Dismounting a Cartridge from a 9490 or SD-3 CTU 95693 Revision P 3-21 Mounting a Cartridge into a DLT Drive Page Dismounting a Cartridge from a DLT Drive Mounting a Cartridge into a T9840 Drive Dismounting a Cartridge from a T9840 Drive Mounting a Cartridge into a T9940 Drive Dismounting a Cartridge from a T9940 Drive Removing a Cartridge from the Hand Standard Door Procedure Expansion Door Procedure Returning the LSM Online Page Drives 9490 SD-3 Power Switch Operator Panel Page Digital Linear Tape Drives T9840 and T9940 Tape Drives 9741/9741E Drive Cabinet 4-6 Revision P 95693 Figure 4-4 is an example of the operator panel: Figure 4-4. T9840/T9940 Operator Panel Service Page A Cartridge Tape Information Page 95693 Revision P A-3 Inspecting a Cartridge Figure A-2. Inspecting an SD-3 Helical Scan Cartridge Figure A-3. Inspecting a DLT Cartridge Inspecting a Cartridge A-4 Revision P 95693 Figure A-4. Inspecting a T9840 Cartridge (C62715) FRONT VIEW REAR VIEW REAR VIEW Figure A-5. Inspecting a T9940 Cartridge (C62727) Page Page Non-DLT Cartridges Figure A-6. 3480 Cartridge Label Locations (C62031) Figure A-7. ETape Cartridge Label Locations (C62528) 95693 Revision P A-9 Applying Labels Figure A-8. EETape Cartridge Label Locations (C62526) Figure A-9. Helical Scan Cartridge Label Locations (C62032) Applying Labels A-10 Revision P 95693 Figure A-10. T9840 Cartridge Label Locations (C62444) Figure A-11. T9940 Cartridge Label Location (C62731) DLT Cartridges 9490 Write-Protect Switch 95693 Revision P A-13 Setting the Write-Protect Switch Figure A-14. Setting the ETape Write-Protect Selector (C62529) Figure A-15. Setting the EETape Write-Protect Selector (C62523) SD-3 Write-Protect Switch DLT Write-Protect Switch T9840 Write-Protect Switch T9940 Write-Protect Switch Page Page Page Glossary Numeric A C D I O L M R S T V Z Page Index Numerics A C D E F G H M N O P R U V W Z Page SUN United States and other countries.