Sun Microsystems FC-100 service manual Installing the Hub on the Mounting Tray

2.3.4Installing the Hub on the Mounting Tray

1.Determine on which side of the tray you are going to install the hub. The first hub goes in position A; the second goes in position B.

2.From the rear of the tray, slide the hub mounting bracket into the slots in the mounting tray (FIGURE 2-2)

You should hear a click as the black plastic retaining tab goes through the notch in the tray.

Position A

Position B

Notch

Retaining tab

FIGURE 2-2Installing the Hub on a Mounting Tray

Note –The front and rear mounting plastics are interchangeable.

2-4Sun StorEdge FC-100 Hub Installation and Service Manual • September 1998