Sun Microsystems FC-100 service manual Install the tray in the cabinet Figure

2. Install the tray in the cabinet (FIGURE 2-1).

Front

Rear

FIGURE 2-1Installing the Tray in the Cabinet

Caution –Use only SAE 10-32 screws to secure the tray to the cabinet mounting

!rails. Using any other screw type will damage the cabinet mounting holes.

a.In the front of the tray, use the Phillips screwdriver to loosely install two 10-32 screws each for the left and right side.

b.In the back of the tray, use the Phillips screwdriver to loosely install two 10-32 screws each for the left and right side.

c.Tighten both sets of screws.

Chapter 2 Installation 2-3