Sun Microsystems HP LTO4 manual Removal and Replacement

Removal and Replacement

Removal and Replacement

Encryption-capable HP LTO 4 tape drives contain an Ethernet card, which is a field replaceable unit (FRU). Depending on the library, each drive tray contains the card in a different location; however, the removal and replacement procedures are similar.

For specific information about the drive trays, refer to:

SL8500 Modular Library System Installation Manual	StorageTek: 96138
SL3000 Modular Library System Installation Manual	StorageTek: 316194201
SL500 Modular Library System Installation Manual	StorageTek: 96114
L700/1400 Library Installation Manual	StorageTek: 95843
L180 Library Installation Manual	StorageTek: 95896

If the manuals are not on hand, go to the Sun Documentation Web site at:

http://docs.sfbay.sun.com/app/docs/prod/tape.storage#hic

FIGURE 2-5Dione Card and Connectors

1.	Dione card	5.	Drive power jumper
2.	Ethernet connector	6.	Power connector to drive
3.	P5	7.	P6
4.	Signal connector

Removal

The following procedure basically describes how to remove and replace a Dione card:

1.Follow the procedures for taking the drive offline.

2.Follow the procedures for removing the drive from the library.

14 KMS: LTO4 Technical Brief • June 2008 Revision:A • 316196601