Using VOP
Start VOP
Important:
■Remember, the Service Delivery Platform (SDP) does not support the LTO4 drives. You may need to make adjustments to the network addresses if mixing tape drives on the same KMA and/or SDP network (LAN 2).
■With this Ethernet connection, you cannot perform the same or similar functions with this tape drive that you can with the
■Before beginning, make sure you have the assigned IP addresses and Agent names for the tape drives available and defined in the KMS manager.
To start the VOP for the LTO4:
1.Configure and connect your laptop to an LTO4 tape drive.
(For example: use a
2.Start the executable file (ltoVOP .file or .bat) to start the application.
3.Enter the default IP address (10.0.0.1) and click Connect.
FIGURE 3-3 LTO VOP Connect Screen
TIP:
You may want to create a shortcut on your desktop that links you to the ltoVOP executable file. Then click on this shortcut to launch this application.
4. Set the drive offline.
20 KMS: LTO4 Technical Brief • June 2008 | Revision:A • 316196601 |
